Runwell — 15M8 Bolt
This is a new type of hex bolt developed by Runwell in response to market feedback such as "always feel unsure of tightening head cap screw", and "when torque is applied, the screw hole is stripped." Runwell solved these problems by designing a bolt with innovative specifications.
The 15M8Bolt is an M8 bolt with a 1.25 pitch, developed specifically for hubs that are secured with a socket bolt. The width of the hexagonal part is 15mm so as with the Runwell Elite Hub Nut, you can use the Runwell Aqualia15 spanner. The washer is crimped and can be tighten without scratching the end.
Specifications:
- Front Axle Shoulder: 9 mm, or the Rear Axle Shoulder: 10 mm (dropout interface)
- Total Length: 47mm
- Threaded section: 30mm
- Thread Pitch: M8 x 1.25mm
- Weight: Front: 66g (set) / Rear: 68g (set)
- Material: Steel
- Sold as a pair
- Hook mark on the middle of the threads that occurs during surface treatment and does not affect use.
Compatibility:
Check your hub has an M8x1.25mm thread, and allows for up to 30mm of thread engagement internally. Provided your thread matches, and there is adequate depth, these will fit.
Original: $11.87
-65%$11.87
$4.15
Description
This is a new type of hex bolt developed by Runwell in response to market feedback such as "always feel unsure of tightening head cap screw", and "when torque is applied, the screw hole is stripped." Runwell solved these problems by designing a bolt with innovative specifications.
The 15M8Bolt is an M8 bolt with a 1.25 pitch, developed specifically for hubs that are secured with a socket bolt. The width of the hexagonal part is 15mm so as with the Runwell Elite Hub Nut, you can use the Runwell Aqualia15 spanner. The washer is crimped and can be tighten without scratching the end.
Specifications:
- Front Axle Shoulder: 9 mm, or the Rear Axle Shoulder: 10 mm (dropout interface)
- Total Length: 47mm
- Threaded section: 30mm
- Thread Pitch: M8 x 1.25mm
- Weight: Front: 66g (set) / Rear: 68g (set)
- Material: Steel
- Sold as a pair
- Hook mark on the middle of the threads that occurs during surface treatment and does not affect use.
Compatibility:
Check your hub has an M8x1.25mm thread, and allows for up to 30mm of thread engagement internally. Provided your thread matches, and there is adequate depth, these will fit.
